Outdoor Solar Flood Lights with Motion Sensor and Remote Control

Intelamp Solar Motion Sensor Outdoor Lights with Remote: 4 Lighting Modes

When you receive the solar motion sensor lights, please pay attention to the following:

First, press the "POWER" button to turn on the light. Cover the solar panel and press the "MODE" button to set the desired lighting mode. The light has 4 modes: 1. High brightness when the sensors detect motion, and low brightness when there is no motion. 2. High brightness when sensors detect motion, and turn off when there is no motion. 3. Motion sensors are disabled, constant medium brightness, and turns off at the end of the timing. 4. Motion sensors are disabled, constant medium brightness, and the light dims after time has elapsed.

Through the remote control, you can choose different sensing delay lighting times to meet your needs: 20 seconds (short time passing), 30 seconds (general setting), or 40 seconds (workplace/long distance activities). The longer the delay time, the more power is consumed, so it is recommended to choose 30 seconds to ensure continuous lighting on rainy days.

In the "no motion sensor" mode, the solar outdoor lights work from dusk to dawn with the sensor function turned off. The solar lamp has three levels of adjustable brightness: 100%, 80%, and 60% for all modes. It is recommended to choose 100% in the sunny season and 80%/60% in winter to ensure a longer lighting time. The chosen mode will be automatically saved, and the solar lamp will work according to that.

The middle lamp head can be adjusted vertically, up and down by 45 degrees, and the side lamp heads can be adjusted horizontally from left to right by up to 90 degrees. The solar panel can be adjusted vertically up and down by 60 degrees. The optimum tilt angle is usually 20 degrees to make the most efficient use of available sunlight and to allow the rainwater to remove any dust buildup efficiently.

The solar lights are charged during the daytime. Press the ON button to ensure the solar light is on, and the lamp will turn on automatically at night. The intelamp solar outdoor lights are equipped with a new solar energy lithium iron phosphate battery with a high safety rating and more than 5 years of service life. The 6000mAh battery capacity is 3 times higher than other leading solar security lights on the market, enabling the solar lights to shine brighter for longer, even on cloudy and rainy days.

The intelamp solar sensor motion detector outside has two holes on the housing for attachment, along with 2 screws, dowels, and two cable ties, providing two installation methods to meet your needs. The intelamp security light system can illuminate an area in your backyard or garden of up to 50*50 square feet, providing all-night security and peace of mind. The impressive high lumen and long-distance sensor coverage of over 100ft enable unparalleled coverage of large areas, making Intelamp a great choice for keeping public, you, and your family safe.

product information: